::/128 – Unspecified Address

This address may only be used as a source address by an initializing host before it has  learned its own address.

IPv4 Equivalent – 0.0.0.0

::1/128 – Loopback Address

This address is used when a host talks to itself over IPv6. This often happens when one program sends data to another.

IPv4 Equivalent – 127.0.0.1

::ffff/96 – IPv4-Mapped Address

Example                  ::ffff:123.4.5.67

These addresses are used to embed IPv4 addresses in an IPv6 address. One use for this is in a dual stack transition scenario where IPv4 addresses can be mapped into an IPv6 address. See RFC 4038 for more details – https://www.ietf.org/rfc/rfc4038.txt

fc00::/7 – Unique Local Addresses (ULAs)

Example:                              fc00:1234:5678::99

These addresses are reserved for local use in home and enterprise environments and are not public address space. These addresses might not be unique, and there is no formal address registration. Packets with these addresses in the source or destination fields are not intended to be routed on the public Internet but are intended to be routed within the enterprise or organization.
See RFC 4193 for more details – https://www.ietf.org/rfc/rfc4193.txt

IPv4 Equivalent – Private or RFC1918 Addresses: 10.0.0.0/8, 172.16.0.0/12, 192.168.0.0/16

fe80::/10 – Link-Local Addresses

Example:   fe80::1234:5678:9abc:1234

These addresses are used on a single link or a non-routed common access network, such as an Ethernet LAN. They do not need to be unique outside of that link.
Link-local addresses may appear as the source or destination of an IPv6 packet. Routers must not forward IPv6 packets if the source or destination contains a link local address.
See RFC 4193 for more details – https://www.ietf.org/rfc/rfc4193.txt

IPv4 Equivalent – 169.254.0.0/16

2001:0000::/32 – Teredo

Example:   2001:0000:4136:e378:8000:63bf:3fff:fdd2

This is a mapped address allowing IPv6 tunneling through IPv4 NATs. The address is formed using the Teredo prefix, the server’s unique IPv4 address, flags describing the type of NAT, the obfuscated client port and the client IPv4 address, which is probably a private address. It is possible to reverse the process and identify the IPv4 address of the relay server, which can then be looked up in the relevant RIR’s Whois database.

You can do this on the following webpage:
http://www.potaroo.net/cgi-bin/ipv6addr

2001:0002::/48 – Benchmarking

Example:   2001:2::1234

These addresses are reserved for use in documentation. They should not be used as source or destination addresses.

IPv4 Equivalent – 198.18.0.0/15

2001:0010::/28 – Orchid

Example:   2001:10::1234

These addresses are used for a fixed-term experiment. They should only be visible on an end-to-end basis and routers should not see packets using them as source or destination addresses.

2002::/16 – 6to4

Example:   2002::1234

A 6to4 gateway adds its IPv4 address to this 2002::/16, creating a unique /48 prefix. As the IPv4 address of the gateway router is used to compose the IPv6 prefix, it is possible to reverse the process and identify the IPv4 address, which can then be looked up in the relevant RIR’s Whois database.

You can do this on the following webpage:
http://www.potaroo.net/cgi-bin/ipv6addr

IPv4 Equivalent – There is no equivalent but 192.88.99.0/24 has been reserved as the 6to4 relay anycast address prefix by the IETF.

2001:db8::/32 – Documentation

Example:   2001:db8::1234

These addresses are used in examples and documentation. They should never be source or destination addresses.

IPv4 Equivalent – 192.0.2.0/24, 198.51.100.0/24, 203.0.113.0/24

2000::/3 – Global Unicast

Example:   2000::1234

Other than the exceptions documented in this table, the operators of networks using these addresses can be found using the Whois servers of the RIRs listed in the registry at:
http://www.iana.org/assignments/ipv6-unicast-address-assignments

IPv4 Equivalent – No equivalent single block

ff00::/8 – Multicast

Example:   ff00::1234

These addresses are used to identify multicast groups. They should only be used as destination addresses, never as source addresses.

IPv4 Equivalent – 224.0.0.0/4